Operating As Full Video Recording And Management System; Operating As Pure Video Recording System; Operating As Iscsi Storage Expansion; Using Bvms Config Wizard - Bosch DIVAR IP all‑in‑one 7000 Series Installation Manual

DIVAR IP all-in-one 7000 (2U)
5.5.1

Operating as full video recording and management system

To operate the DIVAR IP system as full video recording and management system:
1.
2.
See also
–
5.5.2

Operating as pure video recording system

To operate the DIVAR IP system as pure video recording system, you have to logon to the
administrator account (BVRAdmin) in order to perform the necessary configuration steps.
1.
2.
3.
4.
5.
5.5.3

Operating as iSCSI storage expansion

To operate the DIVAR IP system as an iSCSI storage expansion, you have to logon to the
administrator account (BVRAdmin) in order to perform the necessary configuration steps.
1.
2.
3.
4.
5.
5.6

Using BVMS Config Wizard

Intended use for Config Wizard is the quick and easy configuration of a smaller system. Config
Wizard helps you to achieve a configured system including VRM, iSCSI system, cameras,
recording profiles and user groups.
User groups and their permissions are configured automatically. You can add or remove users
and set passwords.
Config Wizard can access Management Server only on the local computer.
You can save an activated configuration for backup purposes and import this configuration
later. You can change this imported configuration after import.
Config Wizard adds the local VRM automatically.
Restrictions:
The following tasks cannot be done with the Config Wizard. Use BVMS Configuration Client
instead.
–
–
–
–
Bosch Security Systems B.V.
On the BVMS default screen, double-click the BVMS Config Wizard icon
Config Wizard.
The Welcome page is displayed.
Configure the system using the Config Wizard.
Using BVMS Config Wizard, page 27
On the BVMS default screen, press CTRL+ALT+DEL.
Hold SHIFT, click Switch User and keep SHIFT pressed for about five seconds.
Enter administrator user name and password.
On the Desktop, in the Tools folder, right-click the Disable_BVMS script, and then click
Run as administrator.
Configure the Video Recording Manager (VRM) from an external system using BVMS
Configuration Client or Configuration Manager.
On the BVMS default screen, press CTRL+ALT+DEL.
Hold SHIFT, click Switch User and keep SHIFT pressed for about five seconds.
Enter administrator user name and password.
On the Desktop, in the Tools folder, right-click the Disable_BVMS_and_VRM script, and
then click Run as administrator.
Add the system as an iSCSI storage expansion to an external BVMS or VRM server using
BVMS Configuration Client or Configuration Manager.
adjusting schedules
configuring systems with no or multiple Video Recording Manager
configuring external storage devices
adding Video Streaming Gateway
Installation manual
System setup | en 27
to start the
2019.08 | V1 | DOC