Saving Snapshots; Recording Video Sequences; Running Recording Program - Bosch VideoJet X10 Installation And Operation Manual

100 en | Operation
6.3

Saving Snapshots

You can save individual images from the video sequence currently shown on the LIVEPAGE in
JPEG format on your computer's hard drive.
6.4

Recording Video Sequences

You can save sections of the video sequence currently shown on the LIVEPAGE on your
computer's hard drive.
1.
2.
NOTICE!
i
You can play back saved video sequences using the Player from Bosch Security Systems,
which can be installed from the product CD supplied (see Abschnitt 3.1 Scope of Delivery,
Seite 11).
6.4.1 Image Resolution
Sequences are saved at the resolution that has been preset in the configuration for the
encoder (see Abschnitt 5.11 Encoder Profile, Seite 38).
6.5

Running Recording Program

The hard drive icon below the camera images on the LIVEPAGE changes during an automatic
recording.
A moving graphic will appear to indicate a running recording. If no recording is taking place, a
static icon is displayed.
V3.0 | 2007.09
Click the icon for saving single images. The image is saved at a resolution of
704 × 576 pixels (4CIF). The storage location depends on the configuration of the
VideoJet X10 (see Abschnitt 5.32.18 Path for JPEG and MPEG files, Seite 88).
Click the icon for recording video sequences to start recording. The storage location
depends on the configuration of the VideoJet X10 (see Abschnitt 5.32.18 Path for JPEG
and MPEG files, Seite 88). A red dot in the icon indicates that recording is in progress.
Click the icon again to stop recording.
Installation and Operating Manual
VideoJet X10
Bosch Security Systems