Table of Contents
Advertisement
14
en | System overview
Component
Power supply
I/O expansion
slots
Mounting rails
Control panel
3.2
Device views
The chassis includes a control panel on the front that features power buttons and status
monitoring LEDs. On the rear there are various I/O ports as well as power supply modules.
Front view:
2019.08 | V1 | DOC
Description
The chassis has redundant power supplies. Redundant power supplies
are hot-swappable, and can be changed without turning off the system.
Each power supply is auto-switching capable. This enables the power to
automatically sense and operate at a 100 V to 240 V input voltage. An
amber light will be illuminated on the power supply when the power is
off. An illuminated green light indicates that the power supply is
operating.
The chassis includes 7 low profile expansion slots.
The unit can be placed in a rack for secure storage and use. To set up
your rack, follow the instructions included in this manual.
The control panel provides a monitoring and control interface. LEDs
indicate system status and buttons control system power.
1
1
2x USB 2.0 ports
3
Information LED
5
HDD (drive activity)
7
Reset
9
Drive carrier LEDs (green: access to
this drive/red: drive failure)
2
3
2
4
6
8
Installation manual
DIVAR IP all-in-one 7000 (2U)
4
5
6
7
Power failure
NIC1/NIC2
Power
Power on/off
Bosch Security Systems B.V.
8
9
Advertisement
Table of Contents
