Saving Snapshots; Recording Video Sequences; Running Recording Program - Bosch VIP X1 XF Installation And Operating Manual

VIP X1 XF
6.3

Saving Snapshots

You can save individual images from the video sequence currently shown on the LIVEPAGE in
JPEG format on your computer's hard drive. The icon for recording single images is only
visible if the unit is configured to enable this process (see Section Allow snapshots, page 41).

6.4

Recording Video Sequences

You can save sections of the video sequence currently shown on the LIVEPAGE on your
computer's hard drive. The icon for recording video sequences is only visible if the unit is
configured to enable this process (see Section Allow local recording, page 41).
1.
2.
NOTICE!
You can play back saved video sequences using the Player program from Bosch Security
Systems, which can be installed from the product CD supplied (see Section 3.1 Scope of
Delivery, page 9).
Image Resolution
Sequences are saved at the resolution that has been preset in the configuration for the
encoder (see Section 5.19 Advanced Mode: Encoder Profile, page 45).
6.5

Running Recording Program

The hard drive icon below the camera images on the LIVEPAGE changes during an automatic
recording.
A moving graphic will appear to indicate a running recording. If no recording is taking place, a
static icon is displayed.
Bosch Sicherheitssysteme GmbH
Click the icon. The image is saved at a resolution of 704 × 576 pixels (4CIF). The storage
location depends on the configuration of the VIP X1 XF (see Section Path for JPEG and
video files, page 41).
Click the icon to start recording. The storage location depends on the configuration of
the VIP X1 XF (see Section Path for JPEG and video files, page 41). A red dot in the icon
indicates that recording is in progress.
Click the icon again to stop recording.
Installation and Operating Manual
Operation | en 95
DOC | V4.1 | 2010.02