Repair And Maintenance - Razor EcoSmart Metro HD Owner's Manual

REPAIR AND MAINTENANCE

HEADLINE
Turn power switch "OFF" before conducting any maintenance procedures.
Adjusting the Brake
Tool Required: 10 mm Wrench
1
To adjust the brake cable tension,
thread the brake lever adjuster in or
out 1/4 to 1/2 turn until the desired
brake adjustment is attained. Most
adjustments are complete at this
step. If brake still needs further
adjustment, proceed to step 2.
HEADLINE REPAIR AND MAINTENANCE
Cleaning Your Scooter
Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents as they may damage the
surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners as they may damage or dissolve the plastic
components or soften the decals or decal adhesive.
Battery Care and Disposal
Do not store in freezing or below freezing temperatures. To properly maintain your battery and ensure maximum
battery life, carefully read the "Charging the Battery" section on page 6 of this owner's manual.
CONTAINS SEALED LEAD-ACID BATTERIES. BATTERIES MUST BE RECYCLED.
Disposal: Your electric scooter uses sealed lead-acid batteries which must be recycled or disposed of in an
environmentally safe manner. Do not dispose of a lead-acid battery in a fire; the battery may explode or leak. Do
not dispose of a lead-acid battery in your regular household trash. The incineration, land filling or mixing of sealed
lead-acid batteries with household trash is prohibited by law in most areas. Return exhausted batteries to a federal or
state approved lead-acid battery recycler or a local seller of automotive batteries. If you live in Florida or Minnesota,
it is prohibited by law to throw away lead-acid batteries in the municipal waste stream.
Charger
The charger supplied with the electric scooter should be regularly examined for damage to the cord, plug,
enclosure and other parts and in the event of such damage, the product must not be charged until it has been
repaired or replaced.
Use ONLY with the recommended charger.
Wheels
Wheels and drive system are subject to normal wear and tear. It is the responsibility of the user to periodically inspect
wheels for excess wear and replace hub motor components as required.
Replacement Parts
The most frequently requested replacement parts are available for purchase at some Razor retail partners. For the
complete selection of replacement parts visit shop.razor.com.
Repair Centers
For a list of authorized Razor repair centers:
• Check online at www.razor.com.
• Additional Customer Service contact information is listed on the back of this manual.
2
If the brake is too tight or too
loose, use a 10 mm wrench to loosen
the nut for additional adjustment on
the brake cable. Securely tighten the
nut when finished.
8 8
In the US and Canada only:
For more information regarding
recycling of rechargeable batteries,
call toll free 1-800-822-8837,
or visit http://www.call2recycle.org
WARNING: If a battery leak
develops, avoid contact with the
leaking acid and place the damaged
battery in a plastic bag. Refer to
the disposal instructions at left. If
acid comes into contact with skin
or eyes, flush with cool water for
at least 15 minutes and contact a
physician.
WARNING: Battery posts,
terminals and related accessories
contain lead and lead compounds.
Wash your hands after handling.
WARNING: Wheelies and
other stunt-type riding reduces your
ability to maneuver and control
your scooter. Take the necessary
precautions, such as wearing
appropriate protective gear and
practice in an area safe for stunt
riding and free from obstructions.