Repair And Maintenance - Razor ECOSMART CARGO Owner's Manual

REPAIR AND MAINTENANCE

headline
Turn power button "OFF" before beginning repair or maintenance:
• Read the instructions
• Remove charger plug
• Turn the power off
Adjusting the Brake
Required Tool: 5 mm Allen Wrench (included)
1
To adjust the brake cable tension,
thread the brake lever adjuster in or
out 1/4 to 1/2 turn until the desired
brake adjustment is attained. Most
adjustments are complete at this
step. If brake still needs further
adjustment, proceed to step 2.
Chain and Rear Wheel Replacement
Required Tools: 5 mm Allen Wrench (included), Phillips Screwdriver and Two (2) 19 mm Wrenches
1
Using a 5 mm Allen wrench,
remove the two (2) bolts from the
brake caliper. Remove brake caliper
and set aside.
3
Using two (2) 19 mm wrenches, loosen the axle nuts.
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
• Secure the product under repair
• Exercise caution around
exposed parts
2
If the brake has too much slack,
loosen the rear anchor bolt with a 5
mm Allen wrench and pull the brake
cable tight. The distance of the
brake wire between the end of the
cable and the anchor bolt should be
between 37 mm and 44 mm.
2
Using a Phillips screwdriver,
remove the four (4) screws from the
chain guard. Remove chain guard
and set aside.
• Contact Razor customer service
if unsure about any repair or
maintenance
• Repair and maintenance should
be performed by an adult only
4
Push the chain tensioner down
to loosen the chain and remove the
chain from the wheel sprocket and
motor sprocket.
Note: Your hands will get greasy
doing this.
11 11
WARNING: The brake is
capable of skidding the rear tire
and throwing an unsuspecting rider.
Practice in an open area free from
obstacles until you are familiar with
the brake function. Avoid skidding to
a stop as this can cause you to lose
control and/or damage the rear tire.