Selecting On/Off Of The Tc Display Function [Tc Display]; Selecting The Tc Frame Rate [Frame Rate] - Fostex FR-2 Owner's Manual

Selecting on/off of the TC display function [TC Display]

The "TC Display" menu item selects whether or not representing time code (LTC) on the Home screen.
By default after the 8347 is installed, LTC is represented on the Home screen when the power is
turned on.
After bringing up the first page of the TC Setup menu, use the [MENU] dial to select "TC Dis-
play" and press the [ENTER] key. The currently selected option flashes (by default, "LTC&ABS"
flashes) and you can now select the desired option.
Use the [MENU] dial to select "LTC&ABS" or "Off" and press the [ENTER] key to confirm your
selection. Your setting remains in effect even if you switch the power off.
See page 4 for details of the TC display function.
Both the ABS time and LTC values are represented on the Home screen.
LTC&ABS
Off
Only the ABS time value is represented on the Home screen.
<Note>: Even if you select "Off", the TC card is active. In other words, though the LTC value
is not shown on the display, you can record or play back time code.
The [Frame Rate] menu item selects the frame rate of time code to be recorded and played back, as
well as generated by the internal TC generator.
After bringing up the first page of the TC Setup menu, use the [MENU] dial to select "Frame
Rate" and press the [ENTER] key. The currently selected option flashes (by default, "29.97DF"
flashes) and you can now select the desired option.
Use the [MENU] dial to select a desired frame rate and press the [ENTER] key to confirm your
selection. The selected frame rate is shown in the lower part of the Home screen.
23.976 -0.1 % of film 24 frame.
24 Film 24 frame.
25 PAL 25 frame.
29.97DF NTSC 29.97 drop frame (default).
29.97 NTSC 29.97 non-drop frame.
30DF NTSC 30 drop frame.
30 NTSC 30 non-drop frame.

Selecting the TC frame rate [Frame Rate]

9