Changes In The Fr-2 When The 8347 Is Installed; The Tc Display Function Is Added - Fostex FR-2 Owner's Manual

Changes in the FR-2 when the 8347 is installed

The newly added TC display function allows representing the TC value and frame rate on the Home
screen along with the ABS value. The first time you turn on the FR-2 after installing the 8347, the TC
display function is active.
You can select the TC display function active or inactive from the "TC Display" menu item which is
newly added to the TC Setup menu. When selecting this function inactive, the Home screen looks the
same as the one when the 8347 is not installed (only the ABS value is shown). See page 9 for details.
When the TC display function is active
(both the LTC and ABS values are shown)
<Note>: If the TC display function is inactive, the TC card is always active. In other words,
though the TC value/frame rate information is not shown on the display, you can record
or play back time code.
According to the setting of the "TC Gen. Mode" menu item in the TC Setup menu, appro-
priate (internally generated or external) time code is shown on the display.
Also, the frame rate currently set is shown. If the frame rate currently set does not match
the frame rate of incoming external time code, the frame rate of external time code
flashes for warning.

The TC display function is added.

The TC value currently being recorded or
played back is shown.
4
When the TC display function is inactive
(only the ABS value is shown)