Selecting The Userbit Of Output Tc [Tc Ubit]; Selecting On/Off Of Tc Output While Paused [Pause Tc] - Fostex FR-2 Owner's Manual

While the "TC Out" menu item is set to "Repro", the "TC Ubit] menu item selects the userbit of time
code fed from the [TIME CODE OUT] connector.
After bringing up the second page of the TC Setup menu, use the [MENU] dial to select "TC
Ubit" and press the [ENTER] key. The currently selected userbit (by default, "<BwfUbit>") starts
flashing and you can now select a desired userbit.
Use the [MENU] dial to select a desired userbit and press the [ENTER] key to confirm the selec-
tion. You can select from among the following. The selected userbit information is output from
the [TIME CODE OUT] connector.
BwfUbit (default)
EEEEERRR
MMDDYYff
DDMMYYff
SSSSSSRR
RRREEEEE
SSSSSSTT

Selecting on/off of TC output while paused [Pause TC]

The "Pause TC" menu item selects whether time code is output from the [TIME CODE OUT] connector
or not while the FR-2 is stopped or paused. By default, time code is not output while the FR-2 is
stopped or paused.
After bringing up the second page of the TC Setup menu, use the [MENU] dial to select "Pause
TC" and press the [ENTER] key. The current option (by default, "Off") starts flashing and you
can now make selection.
Use the [MENU] dial to select "Off" or "On" and press the [ENTER] key to confirm the selection.
Off (default)
On

Selecting the userbit of output TC [TC Ubit]

Outputs the value set by "Set Gen.TC".
EEEEE (Event Number)/RRR (Reel Number)
MM (month)/DD (day)/YY (year)/ff (File Number)
DD (day)/MM (month)/YY (year)/ff (File Number)
SSSSSS (Scene Number)/RR (Reel Number)
RRR (Reel Number)/EEEEE (Event Number)
SSSSSS (Scene Number)/TT (Take Number)
When the transport is stopped or paused, no time code is output.
When the "TC Out" menu item is set to "Repro" and the transport is stopped or paused,
the time code value at the current position is output.
16