Setting The Generator Ubit Mode And User Data [Set Gen.ubit] - Fostex FR-2 Owner's Manual

Setting the generator Ubit mode and user data [Set Gen.Ubit]

The "Set Gen.Ubit" menu item sets the generator TC Ubit mode and user data.
After bringing up the second page of the TC Setup menu, use the [MENU] dial to select "Set
Gen.Ubit" and press the [ENTER] key. The display now shows the screen for showing the current
Ubit mode and user data.
• TC Ubit mode setting
Use the [MENU] dial to select "Ubit mode" and press the [ENTER] key. The current Ubit mode
starts flashing and you can now select the Ubit mode (by default, "uuuuuuuu" flashes).
You can select the desired Ubit mode from among the following modes. Use the [MENU] key to
select a desired mode and press the [ENTER] to confirm your selection.
The default is "00 00 00 00".
uuuuuuuu
BG_76: MM (month) / BG_54: DD (day) / BG_32: YY (year) /BG_10: uu (for USA)
MMDDYYuu
DDMMYYuu
BG_76: DD (day) / BG_54: MM (month) / BG_32: YY (year) /BG_10: uu (for EUR)
When selecting "MMDDYYuu" or "DDMMYYuu", you can set the desired user bit to "uu" of
"BG_10: uu". The other fields are automatically set according to the realtime clock data.
• User data editing
By using the [MENU] dial to select "Edit User >" and pressing the [ENTER] key, the rightmost
field of the current user bit (by default, "00") starts flashing and you can now start editing.
You can enter the desired value to the flashing field using the [MENU] dial. You can move the
flashing field using the [SKIP/CURSOR] key. The edited value is reflected to ""Ubit: [00 00 00
00]" in realtime. After editing, press the [ENTER/YES] key to confirm your setting. You can also
move the flashing field to the right by using the [>>|] key. You can edit a field value from left to
right ("h" -> "m" -> "s" -> "f"). The value entered to the rightmost field is reflected to the
leftmost two digits of a userbit.
After completing the user data editing, pressing the [ENTER] key confirms the user data and the
display changes to show the screen where "Edit User >" flashes. To exit the MENU mode, select
"<<BACK" and press the [ENTER] key repeatedly, or press the [HOME/HOLD RESET] key.
15