Fostex FR-2 Owner's Manual page 14

Setting the time code value for "REC RUN"
In the Rec Run mode, when you start recording a new audio file, the unit jams the last time code
value of the previous audio file. So time code continues through all successive audio files. The
following describes how to edit the last time code value of the previous audio file. The edited
time value is reflected from the next recording.
• Editing the time code value
By using the [MENU] dial to select "Edit >" and pressing the [ENTER] key, the display shows the
screen for editing the last time code value of the previous audio file.
You can edit the flashing field using the [MENU] dial. After editing the field, pressing the [EN-
TER] key moves the flashing field to the right. You can also move the flashing field to the right
by using the [>>|] key. You can edit a field value from left to right ("h" -> "m" -> "s" -> "f").
After editing all fields, pressing the [ENTER] key confirms the time value editing and "Edit >"
starts flashing again. To exit the MENU mode, select "<<BACK" and press the [ENTER] key re-
peatedly, or press the [HOME/HOLD RESET] key.
• Restoring the edited time value to the original value
By using the [MENU] dial to select "Delete >" and pressing the [ENTER] key, the edited time code
value is cancelled and the next time you start recording a new audio file, the unit jams the last
time code value of the previous audio file.
To exit the MENU mode, select "<<BACK" and press the [ENTER] key repeatedly, or press the
[HOME/HOLD RESET] key.
14