The New "Tc Setup" Menu Is Added To The Menu Mode; The Cue Point Editing Screen Is Changed - Fostex FR-2 Owner's Manual

The new "TC Setup" menu is added to the MENU mode.

When the optional 8347 is installed, the "TC Setup" menu is added to the FR-2 MENU mode.
The menu selection screen is now divided into two pages. The "TC Setup" menu is added to the first
page as shown below. This menu includes settings for time code recording/playback functions which
are available when the 8347 is installed. The "TC Display" menu item described above belongs to the
"TC Setup" menu. For details about how to set each menu item, see page 8 and the following pages.
Page 1 of the menu selection screen
The cue point editing screen which can be accessed via the "Cue" menu in the FR-2 MENU mode is
changed when the 8347 is installed, as shown below.
For details about cue point editing, see "Editing time data of a cue point (Edit)" on page 66 of the FR-
2 owner's manual. When making cue point editing with the 8347 installed, note that the following
change has been made.

The cue point editing screen is changed.

<The cue point editing screen when the 8347 is installed>
On the cue point editing screen when the 8347
is installed, the cue point time data is presented
in hour-minute-second format. A decimal num-
ber is given to the second field.
<The cue point editing screen when the 8347 is not installed>
On the cue point editing screen when the 8347
is not installed, the cue point time data is pre-
sented in hour-minute-second-frame-subframe
format.
Page 2 of the menu selection screen
5