Fostex FR-2 Owner's Manual page 13

Setting the time code value for "FREE RUN"
In the Free Run mode, you can jam time code to the FR-2 realtime clock, as well as edit the time
code value to a desired value.
• Jamming to the realtime clock time data:
While "JAM RTC" is selected by using the [MENU] dial, pressing the [ENTER] key immediately
jams time code to the FR-2 realtime clock (in the right screen below, "##h##m##s##f" shows
the RTC data).
In order to record realtime time code accurately, we recommend using this method (the 24H
Run mode is not so accurate).
To exit the MENU mode after jamming time code, select "<<BACK" and press the [ENTER] key
repeatedly, or press the [HOME/HOLD RESET] key.
• Editing to a desired time code value:
While "Edit>" is selected by using the [MENU] dial, pressing the [ENTER] key immediately hold
the current time code value and the "h" field starts flashing.
You can edit the flashing field using the [MENU] dial. After editing the field, pressing the [EN-
TER] key moves the flashing field to the right. You can also move the flashing field to the right
by using the [>>|] key. You can edit a field value from left to right ("h" -> "m" -> "s" -> "f").
When you move the flashing field after editing the value of the current field, all lower fields of
the edited field are reset to "00".
After editing all fields, pressing the [ENTER] key sets the edited time value and "Edit >" starts
flashing again. The edited time value is reflected to the LTC start time of the next audio file.
To exit the MENU mode, select "<<BACK" and press the [ENTER] key repeatedly, or press the
[HOME/HOLD RESET] key.
13