Campbell Hausfeld FP209699 Operating Instructions And Parts Manual

Campbell Hausfeld FP209699 Operating Instructions And Parts Manual

Oilless compressors
Table of Contents

Advertisement

Available languages

Available languages

See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Oilless Compressors
Description
Oilless compressors are designed for
do-it-yourselfers with a variety of home
and automotive jobs. These units
operate without oil. Compressed air
from this unit will contain moisture.
Install a water filter or air dryer if
application requires dry air.

Safety Guidelines

This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
Danger indicates an
imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
Warning indicates
a potentially
hazardous situation which, if not avoided,
COULD result in death or serious injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
Unpacking
After unpacking the unit, inspect
carefully for any damage that may have
occurred during transit. Make sure to
tighten fittings, bolts, etc., before putting
unit into service. In case of questions,
damaged or missing parts, please call
1-800-543-6400 for customer assistance.
Have the date code, model number,
and parts list (with missing parts
circled) before calling.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2010 Campbell Hausfeld/Scott Fetzer
DO NOT RETURN THE
PRODUCT TO THE
STOP!
RETAILER! CALL
1-800-543-6400
Record the Model No., Serial No. and date
of purchase located on the base below the
pump in the space below.
Model No. ____________________
Date Code ____________________
Date of purchase _________________
Retain these numbers for future reference.
Do not operate
unit if damaged
during shipping, handling or use.
Damage may result in bursting and
cause injury or property damage.
General Safety
Information
CALIFORNIA PROPOSITION 65
This product or its
power cord may
contain chemicals, including lead,
known to the State of California to
cause cancer and birth defects or other
reproductive harm. Wash hands after
handling.
GENERAL SAFETY INFORMATION
Since the air compressor and other
components used (filters, lubricators,
hoses, etc.), make up a high pressure
pumping system, the following safety
precautions must be observed at all times:
FP209501, FP209598, FP209599,
FP209601, and FP209699

Breathable Air Warning

This compressor/pump is not
equipped and should not be used "as
is" to supply breathing quality air. For
any application of air for human
consumption, the air
compressor/pump will need to be
fitted with suitable in-line safety and
alarm equipment. This additional
equipment is necessary to properly
filter and purify the air to meet
minimal specifications for Grade D
breathing as described in Compressed
Gas Association Commodity
Specification G 7.1 - 1966, OSHA 29
CFR 1910. 134, and/or Canadian
Standards Associations (CSA).
DISCLAIMER OF WARRANTIES
In the event the compressor is used
for the purpose of breathing air
application and proper in-line
safety and alarm equipment is not
simultaneously used, existing
warranties shall be voided, and the
manufacturer disclaims any liability
whatsoever for any loss, personal
injury or damage.
1. Read all manuals included
with this product carefully.
Be thoroughly familiar
with the controls and the
proper use of the equipment.
2. Follow all local electrical and safety
codes as well as in the US, National
Electrical Codes (NEC) and
Occupational Safety and Health Act
(OSHA).
3. Only persons well acquainted with
these rules of safe operation should
be allowed to use the compressor.
4. Keep visitors away and NEVER allow
children in the work area.
IN619403AV 1/10
MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Campbell Hausfeld FP209699

  • Page 1: Breathable Air Warning

    (with missing parts circled) before calling. REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping. © 2010 Campbell Hausfeld/Scott Fetzer DO NOT RETURN THE PRODUCT TO THE...
  • Page 2: General Safety Information

    Oilless Compressors General Safety Information 5. Wear safety glasses and use hearing protection when operating the pump or unit. 6. Do not stand on or use the pump or unit as a handhold. 7. Before each use, inspect compressed air system and electrical components for signs of damage, deterioration, weakness or leakage.
  • Page 3: Operation

    ASME Safety Valve - This valve automatically releases air if the tank pressure exceeds the preset maximum. FP209501, FP209598, FP209599, FP209601, FP209699 Regulator Knob Pressure Gauge Air outlet Drain Valve...
  • Page 4: Maintenance

    Oilless Compressors Maintenance Disconnect power source then release all pressure from the system before attempting to install, service, relocate or perform any maintenance. Service should be performed by an authorized service representative. The compressor should be checked often for any visible problems and the following maintenance procedures should be performed each time the compressor is used.
  • Page 5 FP209501, FP209598, FP209599, FP209601, FP209699 Notes...
  • Page 6: Troubleshooting Chart

    Oilless Compressors Troubleshooting Chart Symptom Possible Cause(s) Compressor will not run 1. Switch in OFF position 2. No electrical power at wall outlet 3. Compressor has reached automatic shut-off pressure 4. Motor overheated 5. Loose electrical connection 6. ON / OFF switch bad 7.
  • Page 7: Replacement Parts List

    M3x10 screw Pump/motor assembly (Includes part #20) Motor cover Exhaust tube kit Nailer hook FP209501, FP209598, FP209599, FP209601, FP209699 Please provide following information: - Model number - Serial number (if any) - Part description and number as shown in parts list Ref.
  • Page 8: Limited Warranty

    8. RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY: A. Provide dated proof of purchase and maintenance records. B. Call Campbell Hausfeld (800-543-6400) to obtain your warranty service options. Freight costs must be borne by the purchaser. C. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
  • Page 9: Directives De Sécurité

    MÉMENTO : Gardez votre preuve datée d’achat à fin de la garantie ! Joignez-la à ce manuel ou classez-la dans un dossier pour plus de sécurité. © 2010 Campbell Hausfeld/Scott Fetzer NE PAS RENVOYER LE PRODUIT AU ARRÊT!
  • Page 10 Compresseur Sans Huile Généralités sur la Sécurité (Suite) 3. Seules les personnes bien familiarisées avec ces règles d’utilisation doivent être autorisées à se servir du compresseur. 4. Garder les visiteurs à l’écart de/et NE JAMAIS permettre les enfants dans l’endroit de travail. 5.
  • Page 11 Position ON Position OFF Figure 3 FP209501, FP209598, FP209599, FP209601, FP209699 Bouton de régulateur Manomètre Robinet de purge Figure 2 - Identification du modèle pendant le changement d’outils.
  • Page 12: Entretien

    Compresseur Sans Huile Fonctionnement (Suite) LUBRIFICATION Ce produit est “sans-huile” et N’EXIGE PAS d’huile pour fonctionner. AVANT LE PREMIER DÉMARRAGE - PROCÉDURE DE RÔDAGE (Cette procédure doit être terminée avant d’utiliser le compresseur pour la première fois. Ensuite, il n’est pas nécessaire de la refaire.) 1.
  • Page 13 Si le protecteur de surcharge thermique coupe le moteur (OFF) à maintes reprises, rechercher les causes suivantes. Notes FP209501, FP209598, FP209599, FP209601, FP209699 1. Tension basse. 2. Ventilation insuffisante. Si le protecteur de surcharge thermique a coupé le moteur, ceci doit se refroidir avant que le démarrage soit possible.
  • Page 14: Guide De Dépannage

    Compresseur Sans Huile Guide de Dépannage Symptôme Cause(s) Possible(s) Le compresseur ne 1. Interrupteur en position “OFF” fonctionne pas. (arrêt). 2. Aucun courant à la prise de courant murale 3. Le compresseur a atteint la pression d’arrêt automatique 4. Moteur surchauffé 5.
  • Page 15: Liste De Pièces De Rechange

    Vis M3x10 Montage de pompe/moteur (Inclut pièce n Couvercle de moteur FP209501, FP209598, FP209599, FP209601, FP209699 S’il vous plaît fournir l’information suivante : - Numéro du modèle - Numéro de série (si applicable) - Description de la pièce et son numéro sur la liste de pièces...
  • Page 16 2. GARANTIE ACCORDÉE PAR (GARANT) : Campbell Hausfeld/Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Téléphone : (800) 543-6400 3. BÉNÉFICIAIRE DE CETTE GARANTIE (ACHETEUR) : L’acheteur original (sauf en cas de revente) du produit Campbell Hausfeld. 4. PRODUITS COUVERTS PAR CETTE GARANTIE : Ce compresseur d’air Campbell Hausfeld.
  • Page 17: Medidas De Seguridad

    (con las partes que faltan marcadas con un círculo) antes de llamar. RECORDATORIO: ¡Guarde su comprobante de compra con fecha para fines de la garantía! Adjúntela a este manual o archívela en lugar seguro. © 2010 Campbell Hausfeld/Scott Fetzer ¡NO DEVUELVA EL PRODUCTO AL ALTO!
  • Page 18: Informaciones Generales De Seguridad

    Compresores Sin Aceite Informaciones Generales de Seguridad (Continuación) 3. Este compresor sólo debe ser usado por personas que estén bien familiarizadas con las reglas de seguridad y de manejo. 4. Mantenga a los visitantes alejados y NUNCA permita la presencia de niños en el área de trabajo.
  • Page 19 Posición ON Posición OFF Figura 3 FP209501, FP209598, FP209599, FP209601, FP209699 Perilla del regulador Manómetro Salida de aire Llave de drenaje Figura 2 - Identificación de la Unidad Interruptor de presión (ubicado...
  • Page 20: Mantenimiento

    Compresores Sin Aceite Funcionamiento (Continuación) LUBRICACIÓN Este es un aparato sin aceite y NO REQUIERE lubricación para su funcionamiento. ANTES DE ARRANCARLO POR PRIMERA VEZ - PROCEDIMIENTO DE ABLANDE (Complete este procedimiento antes de usar el compresor por primera vez. Una vez completado, no es necesario repetirlo.) 1.
  • Page 21 Si el protector térmico se dispara, debe es perar a que el motor se enfríe antes de encenderlo. Notas FP209501, FP209598, FP209599, FP209601, FP209699 CONCLUSIÓN DEL TRABAJO/ALMACENAJE 1. Coloque el interruptor de ON / OFF en la posición OFF (apagado).
  • Page 22: Guía De Diagnóstico De Averías

    Compresores Sin Aceite Guía de diagnóstico de averías Problema Posible(s) Causa(s) El compresor no 1. El interruptor está en la posición OFF funciona (apagado) 2. No hay corriente eléctrica en el tomacorriente de la pared 3. El compresor alcanzó la presión de corte automático 4.
  • Page 23: Lista De Repuestos

    Ensamblaje de bomba/motor (incluye pieza Nº 20) Cubierta del motor Kit de tubo de escape FP209501, FP209598, FP209599, FP209601, FP209699 Sírvase darnos la siguiente información: - Número del modelo - Número de Serie (de haberlo) - Descripción y número del repuesto según la lista de repuestos...
  • Page 24 1. DURACION: A partir de la fecha de compra por el comprador original tal como se especifica a continuación: Un año. 2. QUIEN OTORGA ESTA GARANTIA (EL GARANTE: Campbell Hausfeld / The Scott Fetzer Company 100 Production Drive, Harrison, Ohio 45030 Teléfono: (800) 543-6400 3.

This manual is also suitable for:

In619403avFp209501Fp209598Fp209599Fp209601

Table of Contents