Campbell Hausfeld FP2095 Easy Setup Manual

Setup Like a Pro
1
Close
pressure regulator,
Turn on compressor and
Allow tank to reach
maximum pressure.
Fetzer Hausfeld/Scott Campbell 2009 ©
7/09 IN629401AV
complete
providing
Campbell
products.
Pro
FP2095
Kit Compressor
chpower.com
Air Gallon 2
2
Attach
air hose
to regulator outlet.
Adjust regulator
knob so outlet
pressure is between
60 psi and 100 psi.
Use 90 psi to
100 psi for
nailing or
stapling.
4
Pull back
Pro. a Like projects their
to them help that customer our to tools coupler.
to dedicated are We product. Hausfeld
or plug with attached inflation
a purchase to deciding for you Thank
accessory.
Hausfeld Campbell
with easier are Projects
Guide Setup Easy
a Like Setup
at us Visit
3
When using the Nailer / Stapler,
Place
4 to 5 drops of nailer
Tip
oil in air inlet. nailer back
to reduce spillage.
collar on
Insert nailer plug
Brad Nailer / Stapler
Part Number: SB504099AV
Nailer Oil Crown Staples
Part Number: ST127012AV Part Number: FN258K00AV
Compressor
Pressure Regulator Knob
Regulator Outlet
ON / OFF Switch Female Coupler
Recoil Air Hose
IMPORTANT: Drain tank after each use. After tank is drained,
tighten drain valve completely to help eliminate air leaks.
Tire Chuck, (2) Inflation Nozzles, Inflation Needle,
Inflation Adapter, and Male Plugs
Part Number: FP204008AV
Brad Nails 3 mm Allen Wrench
Part Number: FB180050AV
FP2095 — Oilless Compressor
Use a wrench to
tighten threads when
connecting hose,
coupler, and plug. Inflation Nozzle
Male Plug Adapter
Inflation Nozzle
Inflation Needle
Male Plug Tire Chuck
OIL: For
use with
Brad Nailer/
Stapler.
Brad Nailer / Stapler
Recoil Air Hose
Part Number: MP268100AV
4 mm Allen Wrench Female Coupler
Part Number: MP288300AV