Campbell Hausfeld FP209501 Operating Instructions And Parts Manual

Campbell Hausfeld FP209501 Operating Instructions And Parts Manual

Campbell hausfeld oilless compressors
Hide thumbs Also See for FP209501:

Advertisement

Available languages

Available languages

See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Oilless Compressors

Description

Oilless compressors are designed for
do-it-yourselfers with a variety of home
and automotive jobs. These units
operate without oil. Compressed air
from this unit will contain moisture.
Install a water filter or air dryer if
application requires dry air.

Safety Guidelines

This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
Danger indicates an
imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
Warning indicates
a potentially
hazardous situation which, if not avoided,
COULD result in death or serious injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.

Unpacking

After unpacking the unit, inspect
carefully for any damage that may have
occurred during transit. Make sure to
tighten fittings, bolts, etc., before putting
unit into service. In case of questions,
damaged or missing parts, please call
1-800-543-6400 for customer assistance.
Have the date code, model number,
and parts list (with missing parts
circled) before calling.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2009 Campbell Hausfeld/Scott Fetzer
DO NOT RETURN THE
PRODUCT TO THE
STOP!
RETAILER! CALL
1-800-543-6400
Record the Model No., Serial No. and date
of purchase located on the base below the
pump in the space below.
Model No. ____________________
Date Code ____________________
Date of purchase _________________
Retain these numbers for future reference.
Do not operate
unit if damaged
during shipping, handling or use.
Damage may result in bursting and
cause injury or property damage.
General Safety
Information
CALIFORNIA PROPOSITION 65
This product or its
power cord may
contain chemicals, including lead,
known to the State of California to
cause cancer and birth defects or other
reproductive harm. Wash hands after
handling.
Since the air compressor and other
components used (filters, lubricators,
hoses, etc.), make up a high pressure
pumping system, the following safety
precautions must be observed at all times:
FP209501, FP209598, FP209599, FP209601
FP209699DB, and

Breathable Air Warning

This compressor/pump is not
equipped and should not be used "as
is" to supply breathing quality air. For
any application of air for human
consumption, the air
compressor/pump will need to be
fitted with suitable in-line safety and
alarm equipment. This additional
equipment is necessary to properly
filter and purify the air to meet
minimal specifications for Grade D
breathing as described in Compressed
Gas Association Commodity
Specification G 7.1 - 1966, OSHA 29
CFR 1910. 134, and/or Canadian
Standards Associations (CSA).
DISCLAIMER OF WARRANTIES
In the event the compressor is used
for the purpose of breathing air
application and proper in-line
safety and alarm equipment is not
simultaneously used, existing
warranties shall be voided, and the
manufacturer disclaims any liability
whatsoever for any loss, personal
injury or damage.
1. Read all manuals included
with this product carefully.
Be thoroughly familiar
with the controls and the
proper use of the equipment.
2. Follow all local electrical and safety
codes as well as in the US, National
Electrical Codes (NEC) and
Occupational Safety and Health Act
(OSHA).
3. Only persons well acquainted with
these rules of safe operation should
be allowed to use the compressor.
4. Keep visitors away and NEVER allow
children in the work area.
FP209699DQL
MANUAL
IN619402AV 1/09

Advertisement

Table of Contents
loading

Summary of Contents for Campbell Hausfeld FP209501

  • Page 1: Breathable Air Warning

    (with missing parts circled) before calling. REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping. © 2009 Campbell Hausfeld/Scott Fetzer DO NOT RETURN THE PRODUCT TO THE...
  • Page 2: General Safety Information

    Oilless Compressors General Safety Information 5. Wear safety glasses and use hearing protection when operating the pump or unit. 6. Do not stand on or use the pump or unit as a handhold. 7. Before each use, inspect compressed air system and electrical components for signs of damage, deterioration, weakness or leakage.
  • Page 3 6. Turn on/off switch to OFF position. 7. Unplug power cord. BEFORE EACH STARTUP OPERATING PROCEDURE 1. Turn switch to OFF ( O ) position and plug in power cord. FP209501, FP209598, FP209599, FP209601, FP209699DB, and FP209699DQ Handle ON/OFF Switch Safety Valve Drain Valve 2.
  • Page 4 Oilless Compressors Maintenance (continued) The compressor should be checked often for any visible problems and the following maintenance procedures should be performed each time the compressor is used. ASME SAFETY VALVE Do not remove or attempt to adjust the safety valve! Figure 5 Check the safety valve by performing the following steps:...
  • Page 5 FP209501, FP209598, FP209599, FP209601, FP209699DB, and FP209699DQ Notes...
  • Page 6: Troubleshooting Chart

    Oilless Compressors Troubleshooting Chart Symptom Possible Cause(s) Compressor will not run 1. Switch in OFF position 2. No electrical power at wall outlet 3. Compressor has reached automatic shut-off pressure 4. Motor overheated 5. Loose electrical connection 6. ON / OFF switch bad 7.
  • Page 7: Replacement Parts List

    FP209039AV Shroud kit Plastic base & Motor cover Standard hardware item FP202839AV — Not Available FP209521AV FP209501, FP209598, FP209599, FP209601, FP209699DB, and FP209699DQ Address parts correspondence to: Attn: Customer Service 100 Production Drive Harrison, OH 45030 U.S.A. Part Number FP204008AV...
  • Page 8: Limited Warranty

    8. RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY: A. Provide dated proof of purchase and maintenance records. B. Call Campbell Hausfeld (800-543-6400) to obtain your warranty service options. Freight costs must be borne by the purchaser. C. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
  • Page 9 MÉMENTO : Gardez votre preuve datée d’achat à fin de la garantie ! Joignez-la à ce manuel ou classez-la dans un dossier pour plus de sécurité. © 2009 Campbell Hausfeld/Scott Fetzer FP209501, FP209598, FP209599, FP209601 NE PAS RENVOYER LE PRODUIT AU ARRÊT!
  • Page 10 Compresseur Sans Huile Généralités sur la Sécurité (Suite) 3. Seules les personnes bien familiarisées avec ces règles d’utilisation doivent être autorisées à se servir du compresseur. 4. Garder les visiteurs à l’écart de/et NE JAMAIS permettre les enfants dans l’endroit de travail. 5.
  • Page 11 Manomètre(s) - Il y a deux types de manomètres près du régulateur. Ces manomètres indiquent la pression 11 Fr FP209501, FP209598, FP209599, FP209601, FP209699DB, et FP209699DQ Poignée Interrupteur ON/OFF Soupape de sûreté...
  • Page 12 Compresseur Sans Huile Fonctionnement (Suite) 2. Ne pas fixer de boyau ou tout autre raccord au compresseur. 3. Mettre l’interrupteur marche/arrêt à la position « OFF » (ARRÊT). 4. Brancher le cordon d’alimentation. 5. Mettre l’interrupteur marche/arrêt à la position « ON » (MARCHE). Laissez le compresseur tourner pendant 5 minutes.
  • Page 13 À l’aide de l’autre main, détourner l’air se déplaçant rapidement, pour protéger le visage. 13 Fr FP209501, FP209598, FP209599, FP209601, FP209699DB, et FP209699DQ 4. Vidanger le réservoir de toute condensation en ouvrant le robinet de vidange au fond du réservoir.
  • Page 14 Compresseur Sans Huile Guide de Dépannage Symptôme Cause(s) Possible(s) Le compresseur ne 1. Interrupteur en position “OFF” fonctionne pas. (arrêt). 2. Aucun courant à la prise de courant murale 3. Le compresseur a atteint la pression d’arrêt automatique 4. Moteur surchauffé 5.
  • Page 15 Trousse d’épaulement Trousse de couvercle du moteur FP209039AV Article normal de quincaillerie – Pas disponible 15 Fr FP209501, FP209598, FP209599, FP209601, FP209699DB, et FP209699DQ Correspondance concernant les pièces : Attn: Customer Service 100 Production Drive Harrison, OH 45030 U.S.A. Número de pièce...
  • Page 16 2. GARANTIE ACCORDÉE PAR (GARANT) : Campbell Hausfeld/Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Téléphone : (800) 543-6400 3. BÉNÉFICIAIRE DE CETTE GARANTIE (ACHETEUR) : L’acheteur original (sauf en cas de revente) du produit Campbell Hausfeld. 4. PRODUITS COUVERTS PAR CETTE GARANTIE : N’importe quel compresseur d’air Campbell Hausfeld.
  • Page 17 RECORDATORIO: ¡Guarde su comprobante de compra con fecha para fines de la garantía! Adjúntela a este manual o archívela en lugar seguro. © 2009 Campbell Hausfeld/Scott Fetzer FP209501, FP209598, FP209599, FP209601 ¡NO DEVUELVA EL PRODUCTO AL...
  • Page 18 Compresores Sin Aceite Informaciones Generales de Seguridad (Continuación) 3. Este compresor sólo debe ser usado por personas que estén bien familiarizadas con las reglas de seguridad y de manejo. 4. Mantenga a los visitantes alejados y NUNCA permita la presencia de niños en el área de trabajo.
  • Page 19 Manómetros - Hay dos tipos de manómetros ubicados cerca del regulador. Estos manómetros indican la 19 Sp FP209501, FP209598, FP209599, FP209601, FP209699DB, y FP209699DQ Mango Interruptor ON/OFF Válvula de seguridad Llave de drenaje presión de aire en libras por pulgada...
  • Page 20 Compresores Sin Aceite Funcionamiento (Continuación) 1. Gire la perilla del regulador totalmente hacia la derecha para abrir el flujo de aire. 2. No conecte una manguera ni ningún otro accesorio al compresor. 3. Coloque el interruptor de encendido/apagado en la posición OFF (apagado).
  • Page 21 Cuando drene el tanque, la presión debe estar por debajo de 10 psi. 21 Sp FP209501, FP209598, FP209599, FP209601, FP209699DB, y FP209699DQ 5. Debe desconectar la manguera del compresor y colgarla con los extremos hacia abajo para que toda humedad se drene.
  • Page 22 Compresores Sin Aceite Guía de diagnóstico de averías Problema Posible(s) Causa(s) El compresor no 1. El interruptor está en la posición OFF funciona (apagado) 2. No hay corriente eléctrica en el tomacorriente de la pared 3. El compresor alcanzó la presión de corte automático 4.
  • Page 23 FP209039AV Juego de la cubierta del motor Artículo estándar de ferretería — No disponible FP202839AV 23 Sp FP209501, FP209598, FP209599, FP209601, FP209699DB, y FP209699DQ Puede escribirnos a: Attn: Customer Service 100 Production Drive Harrison, OH 45030 U.S.A. Número de pieza Ctd.
  • Page 24 1. DURACION: A partir de la fecha de compra por el comprador original tal como se especifica a continuación: Un año. 2. QUIEN OTORGA ESTA GARANTIA (EL GARANTE: Campbell Hausfeld / The Scott Fetzer Company 100 Production Drive, Harrison, Ohio 45030 Teléfono: (800) 543-6400 3.

Table of Contents