Raising And Lowering The Mast; Raising And Lowering The Jib - JLG Toucan 8e Operation And Safety Manual

SECTION 4 – MACHINE OPERATION

Raising and lowering the mast

1. With all control levers in neutral position, push in and
hold the green enable button (1) on the left hand side
of the console.
2. To raise the mast, move the mast controller backward
(2). The speed of the movement is proportionally con-
trolled by the distance of travel of the joystick.
3. Return the controller to its centered (neutral) position to
stop.
4. To lower the mast, move the mast controller forward
(3). The speed of the movement is proportionally con-
trolled by the distance of travel of the joystick.
5. Return the controller to its centered (neutral) position to
stop, then release the enable button.
4-8

Raising and lowering the jib

1. With all control levers in neutral position, push in and
hold the green enable button (1) on the left hand side
of the console.
2. To raise the jib, move the jib controller backward (4).
The speed of the movement is proportionally controlled
by the distance of travel of the joystick.
3. Return the controller to its centered (neutral) position to
stop.
4. To lower the jib, move the jib controller forward (5).
The speed of the movement is proportionally controlled
by the distance of travel of the joystick.
5. Return the controller to its centered (neutral) position to
stop, then release the enable button.
– JLG Lift – 31210162