Table of Contents
Advertisement
Mast Profiles Races
Lube Points - Bronze spacers tracks
Capacity: A/R
Lube - A (See Table 6-6)
Interval - Every 125 hours of operation or after each cleaning
1. From ground control station, fully raise the mast.
2. Clean the inside walls of the mast profiles to remove the
old grease.
3. Using a brush, lubricate the bronze spacer track.
4. Cycle the mast and complete lubrication as necessary.
31210162
SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
– JLG Lift –
Figure 6-15. Mast Profiles Races Lubrication
6-25
Advertisement
Table of Contents
