SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
Swing Bearing Teeth
Lube Points - Coat each tooth
Capacity: A/R
Lube - B (See Table 6-6)
Interval - Every 1000 hours of operation
1. Remove chassis hoods.
2. From ground control station, raise the mast to gain
access to the turntable plate.
3. Remove bearing teeth covers (1).
4. Apply grease on teeth using a brush (2).
Figure 6-14. Swing Bearing Teeth lubrication
6-24
1
1
2
– JLG Lift –
31210162