JLG Toucan 8e Operation And Safety Manual page 113

Hide thumbs Also See for Toucan 8e:
Table of Contents

Advertisement

DTC
FAULT MESSAGE
FUNCTION PREVENTED -
2538
CHARGER CONNECTED
FUNCTION PREVENTED -
2542
BRAKES ELECTRONICALLY
RELEASED FOR TOWING
FUNCTION PREVENTED -
2543
CHAIN SLACK DETECTED
ALL FUNCTIONS PREVENTED -
2544
FAULTY MASTER VALVE
ENABLE
ALL FUNCTION S PREVENTED -
2545
FAULTY SLAVE VALVE ENABLE
SYSTEM TEST MODE ACTIVE
2548
31210162
SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
DESCRIPTION
Functions are prevented while the vehicle is
charging.
Manual brake release mode is activated. Drive or
lift is not possible.
Slack was detected in the mast chain.
A problem has been detected in this function.
A problem has been detected in this function.
The system is in test mode.
– JLG Lift –
CHECK
• Check if the charger is connected to off board power
source and disconnect if desired.
Refer problem to a qualified JLG mechanic.
• Push manual brake release switch again or cycle
power to clear manual brake release mode.
• Check if the brake release switch is damaged,
obstructed or jammed.
Refer problem to a qualified JLG mechanic.
• Refer to section 4 for the required operations to clear
the fault.
• Check if the Chain Slack Limit Switches are damaged,
obstructed or jammed.
Refer problem to a qualified JLG mechanic.
Refer problem to a qualified JLG mechanic.
Refer problem to a qualified JLG mechanic.
• Cycle power to clear test mode.
Refer problem to a qualified JLG mechanic.
6-37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Toucan 12e

Table of Contents