Table of Contents
Advertisement
SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
8-2 Platform Load Sense
DTC
FAULT MESSAGE
LSS HAS NOT BEEN
825
CALIBRATED
FUNCTIONS CUTOUT -
829
PLATFORM OVERLOADED
OVERLOAD SENSOR ERROR
8210
8-6 Steering/Axle
DTC
FAULT MESSAGE
STEER SENSOR - OUT OF
8664
RANGE HIGH
STEER SENSOR - OUT OF
8665
RANGE LOW
6-50
DESCRIPTION
The Load Sensing System has not been cali-
brated.
The platform is overloaded and functions are
restricted.
Inconsistency in the overload sensor information.
DESCRIPTION
Invalid signal from the steer sensor.
Invalid signal from the steer sensor.
– JLG Lift –
CHECK
Refer problem to a qualified JLG mechanic.
• Unload the platform.
• Check if the overload switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
• Check if the overload switch is damaged.
Refer problem to a qualified JLG mechanic.
CHECK
• Check the steer sensor for damage.
Refer problem to a qualified JLG mechanic.
• Check the steer sensor for damage.
• Check the steer sensor is securely mounted.
Refer problem to a qualified JLG mechanic.
31210162
Advertisement
Table of Contents
