Usb Printing - Toshiba e-Studio2000AC Software Installation Manual

3.INSTALLING PRINTER DRIVERS FOR WINDOWS
 USB printing
This section describes how to set up the printer drivers when this equipment is connected with a USB cable on
Windows Vista or later / Windows Server 2008 or later.
The procedure to install the printer driver for USB printing differs depending on the version of Windows used.
 P.62 "Windows 7 or later / Windows Server 2012 or later"
 P.65 "Windows Vista / Windows Server 2008"
 Use a USB2.0 Hi-Speed certified cable.
 Connect the equipment with a PC directly by the USB cable. When it is connected with a PC via a USB hub, the
equipment may not be recognized.
 If a PCLX error occurs, open [Printer properties] of TOSHIBA Universal Printer2 in [Devices and Printers] and select
the [Start printing after last page is spooled] check box in the [Advanced] tab.
 Windows 7 or later / Windows Server 2012 or later
You can install a printer driver for USB printing in Windows 7 or later / Windows Server 2012 or later by using Software
Installer contained in the Install Disc.
To perform installation, you must log onto Windows with the "Administrator" account.
Power on this equipment and your computer.
1
Connect the USB cable to this equipment and your computer.
2
3 Insert the Install Disc into the disc drive.
If Software Installer does not automatically start, use the Explorer to open the "e-STUDIO" folder in the Install
Disc and double-click "Setup.exe".
Select [I agree to the terms of the License Agreement.] and click [Next].
4
To change the display language, select a desired language from the [Select Language] box.
62 Other Installations