3.INSTALLING PRINTER DRIVERS FOR WINDOWS
If your TOSHIBA MFP is not found
If your TOSHIBA MFP is not found, you must first install the printer driver by temporarily selecting a local port and then
configuring the Raw TCP/LPR port.
If this equipment is not discovered over the network after the installation is started, a dialog box indicating this
appears. Click [Continue] to continue the configuration.
Select [Use the following port] and then select "LPT1: ". Then click [OK].
7
8
Click [Install].
Confirm that the installation is completed, and then click [Finish].
9
The Installer may ask you to restart your computer. If it does, select "Yes, I want to restart my computer now."
and click [Finish] to restart your computer.
For the subsequent steps, follow the procedure from step 10 to step 19 on page 41 to page 44.
10
50 Installing the Printer Drivers