Toshiba e-Studio2000AC Software Installation Manual page 124

5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux
Finishing
Option Value
Destination Printer's Default
Exit Tray
Upper Exit Tray
Side Exit Tray
Tray 1
Tray 2
Job Separator Upper
Job Separator Lower
* Black
Toner Mode
Erasable Blue
Folding Off, On
Hole Punch Off
Long Edge Punch without rotation
Short Edge Punch without rotation
Long Edge Punch with 180 degree
rotation
Short Edge Punch with 180 degree
rotation
Stapling
Off
Upper Left (Portrait)/Upper Right
(Landscape)
Middle Left (Portrait)/Middle Top
(Landscape)
Lower Left (Portrait)/Upper Left
(Landscape)
Upper Right (Portrait)/Lower Right
(Landscape)
Middle Right (Portrait)/Middle Bottom
(Landscape)
Lower Right (Portrait)/Lower Left
(Landscape)
Middle Top (Portrait)/Middle Right
(Landscape)
Middle Bottom (Portrait)/Middle Left
(Landscape)
Saddle Stitch (Portrait)/Saddle Stitch
(Landscape)
[Continue] Determines the selected items.
button
* This is available only for the e-STUDIO5008LP Series.
124 Setting Up the CUPS
Alternative Value Description
Select a destination.
The destinations that you can choose vary depending
on the model and the installed options.
This sets whether a print job is printed with the black
toner or erasable blue toner.
Select whether the Folding feature is enabled or not.
Select the hole punch option.
Select whether a print job is stapled or its locations.
"Saddle Stitch (Portrait)/Saddle Stitch (Landscape)"
can be selected only when the Saddle Stitch Finisher
is installed.