Group Authorization Settings - Kyocera TASKalfa 4002i Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Group Authorization Settings

Set restrictions of the machine usage by each individual group registered in the authentication server.
NOTE
To use the group authorization settings, [Network Authentication] must be selected for the authentication method in
"Enabling User Login Administration". Select "On" for "LDAP" in "Protocol Detail".
Enabling User Login Administration (page 9-3)
Protocol Settings (page 8-54)
Group Authorization
1
2
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Model Name
TASKalfa 4002i
TASKalfa 5002i
TASKalfa 6002i
2
"User Login Setting" [Next] > "Group Authorization Set." [Next] >
"Group Authorization" [Change]
[On] > [OK]
Login User Name
4000
5000
6000
9-19
Login Password
4000
5000
6000