Kyocera TASKalfa 4002i Operation Manual page 619

Appendix > Optional Equipment
(9) Banner Guide 10 "Banner Tray"
This tray enables continuous feeding of banner paper. Up to 10 sheets of banner paper can be loaded. To attach the tray
and load paper, refer to the following:
Using the Banner Tray (Option) (page 4-12)
(10) DF-7100 "Inner Finisher"
This is a document finisher capable of holding large print runs and of separating and offsetting multiple copies of a
printout into individual copies. It can also staple the offset printouts.
(11) PH-7100, PH-7120, PH-7130 "Punch Unit"
Attaches to the Inner Finisher and is used to punch holes.
(12) PH-7A, PH-7C, PH-7D "Punch Unit"
Attaches to the Document Finisher and is used to punch holes.
(13) JS-7100 "Job Separator"
Separate paper according to output tray for easier sorting. Specify as the output tray for copy or print jobs. Or, specify as
the default output tray for printing from the copy or Document Box screen, printing from the PC, and printing of the
received fax data.
NOTE
To ensure that paper is delivered to the Job Separator, select the output destination or change the default setting.
Paper Output (page 6-30)
(14) NK-7100, NK-7110 "Optional Numeric Keypad"
The numeric keypad is added to the operation panel. If the optional numeric keypad is installed, numeric keys do not
appear on the touch panel.
(15) Key Counter "Key Counter"
Use the key counter to monitor machine usage. The key counter offers a convenient solution for centralized
management of copy volume for different departments in a large company.
Inserting the Key Counter
(16) DT-730 (B) "Document Table"
Place original or other documents when using the machine.
(17) Keyboard Holder 10 "Keyboard Holder"
A USB keyboard connected to the machine can be placed here.
11-5