Configuring Job Accounting; Default Setting - Kyocera TASKalfa 4002i Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Configuring Job Accounting

Configuring Job Accounting

Default Setting

Select the default value for usage limit, and whether or not to enable counting by paper size.
1
2
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Model Name
TASKalfa 4002i
TASKalfa 5002i
TASKalfa 6002i
2
"Job Accounting Settings" [Next] > "Job Accounting (Local)" [Next] > "Default Setting"
[Next] > "Default Counter Limit" [Next]
Configure the settings.
1
Select [Change] for the item you want to modify and then select [+], [-] or use the numeric
keys to enter the default restriction on the number of sheets.
2
Select [OK].
Item
Counter Limit
[Individual] selected for Copy/Printer Count
Copy Restriction
(Total)
Print Restriction
(Total)
Scan Restriction
(Others)
FAX TX Restriction
Login User Name
4000
5000
6000
When you add a new account, you can change the default
restrictions on the number of sheets used. You can set any
number from 1 to 9,999,999.
The items that can be set differ depending on whether
[Individual] or [Total] is selected for [Copy/Printer Count].
Copy/Printer Count (page 9-52)
Sets the default restriction on the number of sheets used for
copying.
Sets the default restriction on the number of sheets used for
printing.
Sets the default restriction on the number of sheets used for
scanning (excludes copying).
*1
Sets the default restriction on the number of sheets used for
sending faxes.
9-45
Login Password
4000
5000
6000
Description