Announcement Setup - AT&T SynJ SB67108 User Manual

Getting started
Mailbox setup

Announcement setup

The announcement is the greeting callers hear when calls are
answered by the handset mailbox.
The handset has the default announcement "Hello, please leave a
message after the tone." You can use this announcement, or replace
it with your own recording.
Your announcement can be up to two minutes.
Play the current personal announcement:
1. When the handset is idle, press the M.box softkey.
2. Press DIR or CID
and the current announcement plays.
3. Press �ENTER or the OK softkey when finished.
MENU
Record a new personal announcement:
When the handset is idle, press the M.box softkey.
1.
2. Press DIR or CID
�ENTER to play current announcement.
Press
MENU
3. Press the Change softkey, and then press the
Start softkey. The system announces, "Record
after the tone. Press Stop when you are done."
4. Press the Stop softkey when finished. The
recorded announcement plays.
5. Press the OK softkey to use the new recorded
announcement.
-OR-
Press the Change softkey to record the
announcement again.
to select Anncemnt setup. Press
to scroll to Anncemnt setup.
22
�ENTER
MENU
1:Handset 1
11:28AM 03/24
M.box CID
0 New Messages
Play all
Deliver
>Anncemnt setup
Back
Play anncemnt
00:01
OK Change
Record anncemnt
Back Start