Emergency Calls; Group Listen - Mitel MiVoice Business 5320 User Manual

Emergency Calls

Warning for emergency number dialing: Consult your local authorities for Emergency Numbers
and 911 or equivalent service availability in your area.
There are two methods of dialing emergency numbers, based on the programming of your MCD:

Emergency Call Routing NOT programmed

Emergency Call Routing programmed
Verify with your System Administrator which type of emergency number dialing you
can use.
EMERGENCY CALLS WHEN EMERGENCY CALL ROUTING NOT PROGRAMMED
If Emergency Call Routing is NOT programmed, Emergency Number dialing should only be
performed by picking up the handset and selecting the Analog Line key you have programmed.
Emergency dialing using an IP connection may not be supported due to ICP system configuration
and country location. For more information, contact your System Administrator.
EMERGENCY CALLS WHEN EMERGENCY CALL ROUTING PROGRAMMED
This procedure is in addition to the methods described above.
To make an Emergency Call if Emergency Call Routing is programmed:
1. Lift the handset.
2. Dial your Local Emergency Number (911 or equivalent).

Group Listen

With Group Listen, you can carry on a conversation using the handset or headset while allowing
others nearby to listen to the person at the far end over the handsfree speaker. The handsfree
microphone is disabled in Group Listen mode.
To activate Group Listen while in a handset conversation:

Press the Group Listen key.
Audio from the far-end party is now heard through both the handset/headset and the speaker.
To make the call a normal two-way speaker call:

Press (SPEAKER).
40
MiVoice 5320 IP Phone User Guide