Table of Contents
Advertisement
To end a Handsfree Answerback call:
Press either
When the Handsfree Direct Page call ends, the MUTE key light returns to the state it was in
before the call was established.
Direct Paging - Handsfree Answerback Disabled
Your administrator enables or disables Handsfree Answerback and you can also turn it on or off
on your phone. To turn Handsfree Answerback off, see "Direct Paging - Handsfree Answerback
Enabled" elsewhere in this guide. When Handsfree Answerback is disabled on your phone and
you receive a Direct Page, the Direct Page is indicated by a single burst of tone.
To answer Direct Page calls when Handsfree Answerback is disabled:
Phone is idle and MUTE is OFF.
You are on a handset call or
headset call, and MUTE is OFF
You are on a MUTED
handset/headset call, OR, you
are on a Handsfree call
To end a Direct Page call, do one of the following:
Hang up the handset to end a handset call.
Press
(SPEAKER) to end a Handsfree call.
Press
(CANCEL).
When the Handsfree Direct Page call ends, the (MUTE) key light returns to the state it was in
before the call was established.
38
(SPEAKER) or
(CANCEL).
1. Check that MUTE is ON solid.
2. Lift the handset OR press the MUTE key to answer in Handsfree
mode. (The light turns OFF.)
3. Begin speaking.
1. Check that MUTE is flashing.
2. Press MUTE. The light turns ON solid and you are now speaking to
the paging party and have MUTED your handset/headset call.
3. Speak to the paging party. Press MUTE to alternate between
handset and handsfree calls.
The party paging you receives a busy tone. Handsfree Answerback
does not interrupt your call.
MiVoice 5320 IP Phone User Guide
Advertisement
Table of Contents
