Record-A-Call - Mitel MiVoice Business 5320 User Manual

7. Press Enter.
8. At the prompt to verify the PIN, re-enter your new PIN again. The set confirms successful or
failed completion.
9. Press Superkey to end the Superkey session.

Record-a-Call

This feature uses your voice mail system to record your telephone conversations.
You may be required by law to inform the other party that you are recording the
conversation. For specific instructions, consult your system administrator.
To start recording while on a 2-party call:

Press the Record Call key. (See Feature Keys elsewhere in this guide for instructions on
programming a Record Call key to your phone.)
Your system may be programmed to automatically begin recording external calls when
you or the other party answers.
To control recording, do one or all of the following:

To pause recording, press the Pause softkey.

To resume recording after pausing, press the Resume softkey.

To stop a recording without saving it, press the Erase softkey or

To stop and save a recording, press the Save softkey.
Putting the call on hold saves the recording; taking the call off hold starts a new recording.
Depending on system programming, hanging up, or pressing
key, may also save the recording.
To listen to a recording:
1. Lift the handset.
2. Access your voice mailbox.
3. Follow the prompts to retrieve the recording.
MiVoice 5320 IP Phone User Guide
(CANCEL).
(TRANS/CONF) or a DSS
51