Domain Name Service Client Services; Checking Basic Connectivity; Dns Commands - Extreme Networks Summit Summit24 Installation And User Manual

Deleting an Account
To delete a account, you must have administrator privileges. To delete an account, use the following
command:
delete account <username>
NOTE
The account name admin cannot be deleted.

Domain Name Service Client Services

The Domain Name Service (DNS) client in ExtremeWare augments the following commands to allow
them to accept either IP addresses or host names:
•
telnet
•
download [bootrom | configuration | image]
•
upload configuration
•
ping
•
traceroute
In addition, the
Table 12 describes the commands used to configure DNS.
Table 12: DNS Commands
Command
config dns-client add <ipaddress>
config dns-client default-domain <domain_name>
config dns-client delete <ipaddress>
nslookup <hostname>
show dns-client

Checking Basic Connectivity

The switch offers the following commands for checking basic connectivity:
•
ping
•
traceroute
Summit24e3 Switch Installation and User Guide
utility can be used to return the IP address of a hostname.
nslookup
Description
Adds a DNS name server(s) to the
available server list for the DNS client. Up
to three name servers can be configured.
Configures the domain that the DNS client
uses if a fully qualified domain name is not
entered. For example, if the default
domain is configured to be foo.com,
executing ping bar searches for
bar.foo.com.
Removes a DNS server.
Displays the IP address of the requested
host.
Displays the DNS configuration.
Domain Name Service Client Services
47