Software Factory Defaults - Extreme Networks Summit Summit24 Installation And User Manual

ExtremeWare Overview

Software Factory Defaults

Table 7 shows factory defaults for Summit24e3 ExtremeWare features.
Table 7: ExtremeWare Summit24e3 Factory Defaults
Item
Serial or Telnet user account
Telnet
SSH2
SNMP
SNMP read community string
SNMP write community string
RMON
BOOTP
QoS
802.1p priority
802.3x flow control
Virtual LANs
802.1Q tagging
Spanning Tree Protocol
Forwarding database aging period
IP Routing
RIP
OSPF
IP multicast routing
IGMP
IGMP snooping
NTP
DNS
EAPS
NAT
Network Login
RADIUS
TACACS+
Port Mirroring
NOTE
For default settings of individual ExtremeWare features, see the applicable individual chapters in this
guide.
38
Default Setting
admin with no password and user with no password
Enabled
Disabled
Enabled
public
private
Disabled
Enabled on the default VLAN (default)
All traffic is part of the default queue
Recognition enabled
Enabled on Gigabit Ethernet ports
Two VLANs predefined. VLAN named default contains all
ports and belongs to the STPD named s0.
All packets are untagged on the default VLAN (default).
Disabled for the switch; enabled for each port in the STPD.
300 seconds (5 minutes)
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Summit24e3 Switch Installation and User Guide