Table of Contents
Advertisement
Chapter 5: Installing the Virtual Services
This section provides the information and procedures to install the VSP 7200 Series.
Installation checklist
Use this checklist to install the VSP 7200 Series.
No.
Task
1.
Mount the VSP 7200 Series in the
equipment rack.
2.
Install the primary or redundant
power supply.
Important:
A combination of AC-input and
DC-input power supplies in the
same chassis is not supported.
3.
Install the fan modules.
4.
Check the LEDs to verify the
installation.
March 2020
Platform 7200 Series
Installing the VSP 7200 Series
Description
See
Installing the switch in an equipment
rack
on page 40.
You have two options for installing the switch in
an equipment rack:
•
Using the optional slide rack mount kit
page 41
•
Using the supplied brackets
If you have an AC power supply, see
an AC power supply
on page 24.
If you have a DC power supply, see
DC power supply
on page 29.
See
Install a Fan Module
For a description of the LEDs, see
definitions
on page 37.
on
on page 71
Installing
Installing a
on page 34.
LED state
18
Hide quick links:
Advertisement
Table of Contents
