Extreme Networks Summit Summit24 Installation And User Manual page 224

Software Upgrade and Boot Options
Table 65: Boot Option Commands (continued)
Command
download image [<ipaddress> | <hostname>]
<filename> {primary | secondary}
reboot {time <date> <time> | cancel}
save {configuration} {primary | secondary}
show configuration
upload configuration [<ipaddress> |
<hostname>] <filename> {every <time>}
upload configuration cancel
use configuration [primary | secondary]
use image [primary | secondary]
224
Description
Downloads a new image from a TFTP server
over the network. If no parameters are
specified, the image is saved to the current
image.
Reboots the switch at the date and time
specified. If you do not specify a reboot time,
the reboot happens immediately following the
command, and any previously scheduled
reboots are cancelled. To cancel a previously
scheduled reboot, use the cancel option.
Saves the current configuration to nonvolatile
storage. You can specify the primary or
secondary configuration area. If not specified,
the configuration is saved to the primary
configuration area.
Displays the current configuration to the
terminal. You can then capture the output and
store it as a file.
Uploads the current run-time configuration to
the specified TFTP server. If every <time>
is specified, the switch automatically saves the
configuration to the server once per day, at the
specified time. If the time option is not
specified, the current configuration is
immediately uploaded.
Cancels a previously schedule configuration
upload.
Configures the switch to use a particular
configuration on the next reboot. Options
include the primary configuration area or the
secondary configuration area.
Configures the switch to use a particular image
on the next reboot.
Summit24e3 Switch Installation and User Guide