Security Licensing; Obtaining A Security License; Security Features Under License Control; Software Factory Defaults - Extreme Networks Summit 300-48 Software User's Manual

ExtremeWare Overview

Security Licensing

Certain additional ExtremeWare security features, such as the use of Secure Shell (SSH2) encryption,
may be under United States export restriction control. Extreme Networks ships these security features in
a disabled state. You can obtain information on enabling these features at no charge from Extreme
Networks.

Obtaining a Security License

To obtain information on enabling features that require export restriction, access the Extreme Networks
Support website at:
http://www.extremenetworks.com/go/security.htm
Fill out a contact form to indicate compliance or noncompliance with the export restrictions. If you are
in compliance, you will be given information that will allow you to enable security features.

Security Features Under License Control

ExtremeWare version 6.0 and above supports the SSH2 protocol. SSH2 allows the encryption of session
data. The encryption methods used are under U.S. export restriction control.

Software Factory Defaults

Table 3 shows factory defaults for Summit 300-48 ExtremeWare features.
Table 3: ExtremeWare Summit 300-48 Factory Defaults
Item
Serial or Telnet user account
Telnet
SSH2
SNMP
SNMP read community string
SNMP write community string
RMON
BOOTP
QoS
802.1p priority
802.3x flow control
Virtual LANs
802.1Q tagging
Spanning Tree Protocol
Forwarding database aging period
IP Routing
20
Default Setting
admin with no password and user with no password
Enabled
Disabled
Enabled
public
private
Disabled
Disabled on the default VLAN (default)
All traffic is part of the default queue
Recognition enabled
Enabled on Gigabit Ethernet ports
Two VLANs predefined. VLAN named default contains all
ports and belongs to the STPD named s0.
All packets are untagged on the default VLAN (default).
Disabled for the switch; enabled for each port in the STPD.
300 seconds (5 minutes)
Disabled
Summit 300-48 Switch Software User Guide