Summit24E2 Switch Front View; Console Port; Gbic Ports - Extreme Networks Alpine 3808 Hardware Manual

Summit24e2 Switch Front View

The Summit24e2 switch is 1U in height and has 24 autosensing 10BASE-T/100BASE-TX ports using
RJ-45 connectors and provides either two unpopulated GBIC ports or two fixed 1000BASE-T ports.
Figure 35 shows the front view of the Summit24e2 switch.
Figure 35: Front view of the Summit24e2 switch

Console Port

Use the console port (9-pin, "D" type connector) to attach a terminal and access the CLI via a serial
connection. Use the console port for local management.

GBIC Ports

The Summit24e2 switch provides two Gigabit Ethernet ports. All of the Gigabit Ethernet ports use SC
connectors. You can use the following GBICs in the Summit24e2 switch:
• 1000BASE-SX
• 1000BASE-LX
• 1000BASE-LX70
• ZX GBIC
GBIC Media Types and Distances
Table 28 describes the media types and associated maximum distances for each GBIC type.
Table 28: GBIC types and maximum distances
Standard
SX
(850 nm optical window)
LX
(1310 nm optical window)
ZX
(1550 nm optical window)
Extreme Networks Consolidated Hardware Guide
Media Type
50/125 µm multimode fiber
50/125 µm multimode fiber
62.5/125 µm multimode fiber
62.5/125 µm multimode fiber
50/125 µm multimode fiber
50/125 µm multimode fiber
62.5/125 µm multimode fiber
10/125 µm single-mode fiber
10/125 µm single-mode fiber*
10/125 µm single-mode fiber
Summit24e2 Switch Front View
Mhz•Km Maximum
Rating Distance (Meters)
400 500
500 550
160 220
200 275
400 550
500 550
500 550
– 5,000
– 10,000
– 50,000
89