Summit1I Switch Front View; Gbic Ports - Extreme Networks Alpine 3808 Hardware Manual

Summit Switch Models

Summit1i Switch Front View

As shown in Figure 15 and Figure 16, the Summit1i switch is 2U in height and is available in two port
configurations:
• Six autosensing 100BASE-TX/1000BASE-T ports with RJ-45 connectors and two 1000BASE-X ports
with SC connectors
• Six 1000BASE-SX ports with MT-RJ connectors and two 1000BASE-X ports with SC connectors
Figure 15: Front view of the Summit1i switch with 100BASE-TX/1000BASE-T ports
100/1000 Mbps ports
TOP ROW:
GREEN = 1000Mbps
BOTTOM ROW:
AMBER = ACTIVITY
1 2
GREEN = LINK OK
FLASHING GREEN = DISABLED
1 2 3 4 5 6 7 8
Port status LEDs
Figure 16: Front view of the Summit1i switch with 1000BASE-SX ports
1000 Mbps ports
1 2
1 2 3 4 5 6 7 8
Port status LEDs

GBIC Ports

Both Summit1i switch models provide two unpopulated GBIC ports with SC connectors. You can use
the following GBICs in the Summit1i switch:
• 1000BASE-SX
• 1000BASE-LX
• 1000BASE-LX70
• ZX GBIC
• LX100
• UTP GBIC
66
100BASE-TX/
3 1000BASE-T 4 5 6
3 4 5 6
Unit status LEDs
1000BASE-X
7 8
PSU A
PSU B
MGMT
Gigabit Ethernet ports
Unit status LEDs
7 8
Gigabit Ethernet ports
SHG_S1T
SHG_S1SX
Extreme Networks Consolidated Hardware Guide