Coolant Pump Belt Replacement; Air Cleaner Replacement; Disposal And Scrapping - Kohler LOMBARDINI MARINE KDI 1903M-MP Owner's Manual

6.7 Coolant pump belt replacement

1. Perform the operations from point 1 to 3 of
2. Remove belt A.
3. Insert the new belt A onto pulley G1 and start fitting pulley
G2 in point B, making sure to channel the internal ribs of
the belt into the ducts of pulley G2, as shown in detail B1.
4. Start turning pulley G1 clockwise manually, keeping belt
A in position, as shown in detail B1.
5. Continue turning pulley G1 until belt A is completely
channelled on pulley G2.
6. Perform operations from point
Par. 6.6.
4 to 7 of

6.8 Air cleaner replacement

1. Loosen clamp A and remove
filter B from manifold A.
2. Fasten the new air cleaner B
onto manifold C using clamp A.

6.9 Disposal and scrapping

• In case of scrapping, the engine shall be disposed of in
appropriate locations, in conformity with the law in force.
• Before scrapping, it is necessary to separate the rubber or
plastic parts from the rest of the components.
ED0053030870 _04
INFORMATION ABOUT REPLACEMENTS
Par. 6.6.
G2
6.17
B
A C
6.18
• The parts only composed of plastic material, aluminium
• Waste oil must properly be recycled and disposed of in the
A
6.16
B
B1
G1
B
A
and steel can be recycled if collected by the appropriate
centers.
correct way to safeguard the environment. According to the
laws in force, it is classified as hazardous waste, therefore it
must be collected by the appropriate centers.
6
C
33 EN