6.4 Water pump impeller replacement
Important
• Replace gasket G.
1. Loosen capscrews A and remove cover B.
2. Remove impeller C from pump body D.
3. Grease the new impeller C.
4. Insert the new impeller C onto shaft E.
5. Fasten cover B with capscrews A and washers F and
insert gasket G between cover B and pump body D.
C
E
6.8
6.5 Coolant replacement
1. Undo cap A to drain all liquid from the system contained in
the engine crankcase ducts into an appropriate container
(Par. 3.5).
Important
• Perform the operations described in Par. 5.6 before
proceeding.
• Replace gasket C.
2. Screw cap A onto crankcase B, inserting gasket C
(tightening torque 50 Nm).
3. Perform the operations described in Par. 4.7.
ED0053030870
_04
INFORMATION ABOUT REPLACEMENTS
A
B
6.7
A
F
B
6.9
B
A
6.10
B
6.11
6
D
C
G
D
B
A
C
31
EN