Humidification Settings; Dehumidification Settings - Johnson Controls T8690 Owner's Manual And Installation Instructions

Main Menu Buttons -
Humidity
IMPORTANT: Aux Output Usage must be set for Hum or Dehum
for these settings to take effect. See: AUX Output Settings in
the Installation Settings menu.

Humidification Settings

Humidify setpoint
Adjust Humidify setpoint. (0% - 60%)
Humidify only with heat - OFF
When this step is ON, Humidify will only run with a demand for heat.
Run fan when humidifying - OFF
When this step is ON, the fan will run with a call for Humidification.

Dehumidification Settings

Dehumidify setpoint
Adjust Dehumidify setpoint. (25% - 99%)
Run A/C to dehumidify - OFF
When this step is ON, the A/C system will be used for Dehumidification.
Maximum Overcool
This specifies how many degrees the A/C system will run past the cool
setpoint to satisfy a demand for Dehumidification. (0 - 20 degrees F)
Reheat - OFF
This turns on electric strip heat during an A/C to dehumidify demand to help
maintain desired room temperature. (Run A/C to dehumidify must be set
to ON and Dip Switch #1 must be set to ELEC to access this feature.)
Humidity
The Humidity feature allows the thermostat to
control a humidifier or use your air conditioner
to dehumidify the space.
(0%)
(99%)
(0˚)
24