Thermostat Name; Available Modes; Sd Card (Import And Export); General Setup - Johnson Controls T8690 Owner's Manual And Installation Instructions

Main Menu Buttons -
Settings

Thermostat Name

Use keypad to name
your thermostat. The
name is displayed on
the Home Screen.
(Up to 14 characters)
Name appears here

Available Modes

Choose the desired modes the thermostat will use: Heat, Cool, Heat & Cool,
or Auto (All). For example, if you only have a heater, choose Heat, and only
Heat & Off modes will be available. This will simplify the operation for the user.
SD Card
Import and export files to and from the thermostat. See the
ColorDisplay Assistant instructions for further details.
Import Settings from SD Card
Upload files from ColorDisplay Assistant or
another thermostat.
Export Settings to SD Card
Export files from one thermostat and import them into others.

General Setup

Units
Fahrenheit (F)
Celsius (C)
Settings
Thermostat heating and
cooling options are found
in this menu.
(F)
37
(all)
*NOTE: A 2GB SD card is
recommended. To import and
export settings, the SD card must
contain the same version of the
firmware as the thermostat.
ColorDisplay Assistant will
keep the firmware current.