Main Menu Buttons -
Installation Settings
Sensor Settings
Control Sensor
When a remote sensor is connected to the thermostat, the user may choose
which sensor source is used to measure room temperature.
Thermostat sensor only
Wired Sensor only
Average remote/thermostat
Wired Sensor Use
The wired sensor may be used as follows:
Outdoor sensor
Remote Sensor
Supply Sensor
Return Sensor
Calibrate Sensors
The thermostat and wired sensor may be calibrated -7˚ to +7˚ F .
The integral humidity sensor may be calibrated -20% to +20% RH.
Fan Off Delay
Runs the fan for a short time after Cooling or electric strip heat turns off
to increase system efficiency. (0 -120 Secs.)
Test Outputs
The installer or service technician can use this feature to test the
functions without any time delays of the thermostat.
With a 1st stage cooling call, Y1 and G are active
Settings
(Continued)
(thermostat)
(remote)
(0˚)
41
(0s)