Dealer Information; Upgrade Firmware; Delete Custom Images; Calibrate Clock - Johnson Controls T8690 Owner's Manual And Installation Instructions

Main Menu Buttons -

Dealer Information

A Dealer may enter their company contact information for the customer to use
when they need service. This will appear when the "Who To Call For Service"
button is pressed in the Information Menu.
Use the keyboard to enter your information.
•
Dealer Name
•
Contact Name
•
Dealer Phone
•
Dealer Email
•
Dealer Website

Upgrade Firmware

Press to upgrade the thermostat firmware. The SD Card must be in the
thermostat SD Card reader and contain the valid firmware. If an error
message appears, confirm with ColorDisplay Assistant that firmware is
up to date or simply try reinserting the SD card.
If you are connected to Skyport Wi-Fi and you receive an Alert that new firmware
is available, simply press the Upgrade Firmware button to upgrade wirelessly.
Note: Occasionally an update that requires a large amount of data is not possible
to do wirelessly. In this case an update using an SD card will be required.

Delete Custom Images

Press to delete the custom photos you uploaded to the thermostat.
Factory Defaults
Press to reset the thermostat back to the factory settings.

Restart Thermostat

If needed, press here to restart the thermostat.
Settings
Please use
ColorDisplay
Assistant to add
Dealer's logo.
(See page 45)
42
Dealer's
Logo
here