Care And Maintenance - CDA HVG980 Directions For Installation, Use And Maintenance

Five burner gas hob
Table of Contents

Advertisement

with flat bottoms and choose an appropriate burner depending
on the size of the pan. The most efficient use of the hob is shown
below, where the pan and burner are correctly chosen.
Use pan lids where possible to minimize the energy usage of
your appliance.
Ensure that the pans do not overlap the edges of the pan
stands, nor cover the control panel.
Fig. 3
The table below shows the sizes of pan that should be used with
each burner:
Burner
Auxiliary
Medium
Large
Ultra large

Care and maintenance

The hob has a glass and a stainless steel surface. Due to this you
should use a non-abrasive cleaner. Any abrasive cleaner (including
Cif) will scratch the surfaces and could erase the control panel
markings. Stainless steel can be effectively cleaned by simply using
a dilute solution of water and washing up liquid, and drying to a shine
with a clean cloth.
Over time with use, the stainless steel surface may discolour;
this is normal and does not constitute a fault with this appliance.
Proprietary stainless steel cleaners are available.
Minimum
90mm
160mm
220mm
240mm
Maximum
150mm
220mm
260mm
280mm
9

Advertisement

Table of Contents
loading

Table of Contents