Table of Contents
Advertisement
11. Troubleshooting
!
The
iDECT X2i must be serviced by trained engineers. NEVER
attempt any repairs or adjustments yourself - you could make the problem
worse and invalidate the Guarantee.
ALWAYS check
you have followed the steps listed in Section 2 to
first that:
install and set up your
all connectors are firmly inserted in their sockets.
mains power is switched on at the socket.
the batteries are correctly and securely installed, and
are not run down
Everyday use
"I cannot make or
Check that the Base unit's mains power adapter is
answer calls."
plugged in and power is switched on. The Base unit
needs mains power for normal operation of the phone
- not just for charging the batteries.
Make sure you're using the telephone line cable that
was supplied with your iDECT X2i. Other telephone line
cables might not work.
Move the Handset closer to the Base unit.
Check the Battery Level symbol on the display. If it is
low, replace the handset on the base unit or charger pod
to recharge the batteries.
Switch off power at the mains socket, wait for a few
seconds and then switch back on. This may solve the
problem.
If you still can't make calls, try re-registering the
Handset.
"When I press keys
Make sure the batteries are fitted in your handset. If the
on the Handset,
Battery Level symbol on the display shows 'low',
nothing happens."
recharge the batteries.
Press and hold the OK button until the handset comes
to life. The OK button switches the handset on and off.
Check whether there's a 'Lock' symbol on the display. If
so, the keypad is locked. Turn to Section 3 to find out
how to unlock it.
iDECT X2i.
34
Advertisement
Table of Contents
