Setting up and using the home screen applications
•
Make sure that the printer has access rights to the folder where the bookmark is located.
4
Apply the changes.
Setting up Card Copy
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Apps > Card Copy > Configure.
3
Configure the output options and scan settings.
Notes:
•
When scanning a card, make sure that the scan resolution does not exceed 200 dpi for color and
400 dpi for black and white.
•
When scanning multiple cards, make sure that the scan resolution does not exceed 150 dpi for color
and 300 dpi for black and white.
•
You need a printer hard disk to scan multiple cards.
•
Make sure that the printer network and e‑mail settings are configured.
4
Apply the changes.
Using Shortcut Center
1
From the home screen, touch Shortcut Center, and then select a printer function.
2
Touch Create Shortcut, and then configure the settings.
3
Touch Save, and then type a unique shortcut name.
4
Apply the changes.
Setting up Scan Center
1
From the home screen, touch Scan Center.
2
Select and create a destination, and then configure the settings.
Notes:
•
When creating a network destination, make sure to validate and adjust the settings until no errors
occur.
•
Only destinations created from the Embedded Web Server are saved. For more information, see the
documentation that came with the solution.
3
Apply the changes.
19