Lexmark CX827 User Manual page 102

Understanding the printer menus
Menu item
Memory Use
All receive
Mostly receive
Equal*
Mostly send
All send
Cancel Faxes
Allow*
Don't Allow
Fax Number Masking
Off*
From Left
From Right
Digits to Mask
0–58 (0*)
Enable Line Connected
Detection
Off
On*
Enable Line In Wrong Jack
Detection
Off
On*
Enable Extension in Use
Support
Off
On*
Optimize Fax Compatibility
Fax Transport
Analog*
etherFAX
None
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the amount of internal printer memory allocated for faxing.
Note: This menu item prevents memory buffer conditions and failed faxes.
Cancel outgoing faxes before they are transmitted, or cancel incoming faxes
before they finish printing.
Specify the format for masking an outgoing fax number.
Specify the number of digits to mask in an outgoing fax number.
Determine whether a telephone line is connected to the printer.
Note: Detection takes place when turning on the printer and before each call.
Determine whether a telephone line is connected to the correct port on the
printer.
Note: Detection takes place when turning on the printer and before each call.
Determine whether a telephone line is used by another device, such as another
phone on the same line.
Note: Detection takes place when turning on the printer and before each call.
Configure the printer fax functionality for optimal compatibility with other fax
machines.
Set the fax transport method.
102