Lexmark CX827 User Manual page 77

Understanding the printer menus
Maintenance
Configuration Menu
Menu item
USB Configuration
USB PnP
1*
2
USB Configuration
USB Scan to Local
On*
Off
USB Configuration
USB Speed
Full
Auto*
Tray Configuration
Size Sensing
Tray [x] Sensing
Off
On*
Tray Configuration
Tray Linking
Automatic*
Off
Tray Configuration
Show Tray Insert Message
Off
Only for unknown sizes*
Always
Tray Configuration
A5 Loading
Short Edge
Long Edge*
Tray Configuration
Paper Prompts
Auto*
Multipurpose Feeder
Manual Paper
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Change the USB driver mode of the printer to improve its
compatibility with a personal computer.
Set whether the USB device driver enumerates as a USB
Simple device (single interface) or as a USB Composite device
(multiple interfaces).
Set the USB port to run at full speed and disable its high‑speed
capabilities.
Set the tray to sense automatically the paper size loaded into
it.
Set the printer to link the trays that have the same paper type
and paper size settings.
Display a message that lets the user change the paper size and
paper type settings after inserting the tray.
Determine the default loading orientation for the A5 size paper
in all paper sources.
Set the paper source that the user fills when a prompt to load
paper appears.
Note: For Multipurpose Feeder to appear, in the Paper menu,
set Configure MP to Cassette.
77