Table of Contents
Advertisement
6. Click
Install Printer Driver
instructions to install your printer driver. You also install
Status Monitor 2. When you restart your system after
installing the printer software, leave your CD-ROM in
the drive.
7. Continue with "Install Your Bonus Software and
Electronic Manual" on the back of this card.
Windows 98 with USB Connection
1. Make sure your printer and computer are connected
and turned off. Then turn on your computer and wait
until you see the Windows 98 desktop icons.
2. Turn on your printer. You see the Add New Hardware
Wizard screen.
3. Insert your printer software CD-ROM and click
4. At the next screen, select
Search for the best
driver for your device
click
Next
a location
D:\WIN98
your CD-ROM drive
letter). Then click
5. The Add New Hardware Wizard now displays
USB Printer
printer files to your system. At the next screen, click
Finish
.
6. Windows 98 detects your printer; click
your printer driver.
7. At the next screen, select
Search for the best driver
for your device
Next
. Select
location
type
D:\WIN98
your CD-ROM drive
letter). Then click
8. Follow the on-screen instructions to install your
printer driver. Be sure to click the
set your printer as the Windows default printer. At the
last screen, click
9. Now you're prompted to install Status Monitor 2.
If you're asked to specify a location, type
D:\DRIVERS\WIN98
drive letter). Then click
. Select
Specify
and type
(where
D
is
Next
; click
Next
and click
Specify a
and, if necessary,
(where
Next
Finish
(where
, then follow the on-screen
and
.
. The installer copies the USB
D
is
.
Yes
.
D
is your CD-ROM
OK
.
Next
EPSON
Next
to install
radio button to
.
Advertisement
Table of Contents
